Vintage Pen Sacs and Parts from The Pendragons

The Pendragons
JIM MARSHALL AND LAURENCE OLDFIELD's
BACK IN STOCK ORDER NOW.



 

Fountain Pen Nib Repair and Knock Out Block SPECIAL DEAL 99.99

Fountain Pen Nib Repair and Knock Out Block SPECIAL DEAL 99.99
Special Offer
View detailed images
Price: 99.99
Normal Price: 129.99
You Save: 30.00
% Saved: 23.08%!
 LAST ONE at £99.99

For those of you how wish to repair your damaged nib, here is the essential tool.
Nibs that are bent, twisted or sprung can all be repaired on the block.
Nibs and Feeds can be removed via the Knockout Holes

Some nibs are screw in and come within their own sleeves 
It is not advisable to try and remove these nibs from there sections and sleeves
With this type of nib removal knock out tool.





Block has 8 assorted size holes to enable the Nib and Feed to be removed from the section.
Ranging from 4.6 mm - 11.50 mm

2 Diminishing Curves 1 Concave 1 Convex.

3 Different diameter knockout Rods. 3.3 mm, 4.7 mm, and 6.3 mm in length
All rods are 3 3/4 inches in length (9.5cm)

4 Assorted Burnishing Tools

1 Knockout Hammer



Heavy Block Weighs 500 grams Total weight Packed of kit 920 grams 

This block is manufactured from a metal compound giving a hard and smooth surface to work on.
The block comes with 4 assorted burnisher tools to work with on your nibs.
 3 Knockout Rods, and Hammer.

Each of the standard burnishers are 18cm in length.
The roller burnisher is 16cm in length.

Each end on the standard burnisher can be used

Important note, this block is only for the repair of the standard open nib, NOT CONE and CIRCULAR NIBS. e.g. Sheaffer Triumphs, Parker "51" or similar type nibs.






The Roller Burnisher




The Block has both Concave and Convex curves for working the underside and top faces of the nib.
The top of the Convex Curve is straight and level as is the bottom of the Concave Curve.
The available area on both surfaces will enable nibs of all sizes to be worked on.

Be aware that over burnishing will result in the metal of the nib hardening and may even become brittle and crack.

Alway make sure that the block is firm to your work surface to prevent slipping while working.
Resting against a stop bar, or on a non slip surface.

Remember, don't just jump in and start repairing your solid gold vintage nib, practice first with an old nib. 
The amount of pressure used to achieve the finished result, will vary depending on the type, material and size of the nib.
It will take time and effort to repair a nib, practice and patience is essential in achieving the end result.




 




People who purchased this also purchased

INK SACS LATEX FOR FOUNTAIN PENS Standard Straight

INK SACS LATEX FOR FOUNTAIN PENS Standard Straight

Parker Wrench Kit for Vacumatics and

Parker Wrench Kit for Vacumatics and "51" Pens

Fountain Pen Section Pliers

Fountain Pen Section Pliers

Parker Vacumatic Diaphragms

Parker Vacumatic Diaphragms

Parker Vacumatic Sac Pellet Pusher

Parker Vacumatic Sac Pellet Pusher

Shellac

Shellac

Fountain Pen Ink Sac Peg Gauge

Fountain Pen Ink Sac Peg Gauge

Cap & Barrel Brushes

Cap & Barrel Brushes

Fountain Pen Forceps 5.5 inches

Fountain Pen Forceps 5.5 inches

Your Basket

Your basket is empty

Recently Viewed Items

Change Language

Payments powered by WorldPay
MasterPass
Now accepting Barclays Pingit